10 - 2010
6 USER TOOLS
There are two types of user tools to use with the Combo - T or directly on their components: for
programming and for simulation ccTalk.
6.1 PROGRAMMING TOOLS
6.1.1 User application HEUS
The application HEUS is used for the management of programming files and to update the
firmware of the devices, databases in validators, etc. The rest of devices with microprocessor in
the Combo-T drive, except the Discriminators, can be updated using this application.
Figure 31: Screen shot of the application HeUs
The tool HeUs is available on the technical website of Azkoyen Medios de Pago
(http://sat.azkoyen.com). Files can also be downloaded from the web for programming.
Once you have saved these files in the directory \HEUS\DATAFILES, they can be transferred to
the devices, using the connection cable directly from the PC or through of the portable tool TL20.
There is a specific manual, both for the TL20 and the HEUS, available on the Azkoyen website;
you should consult them for the detailed instructions for managing and operating these devices.
To Next Page
Loading...
Need help?
General