37 © Banner Engineering Corp. www.bannerengineering.com
SPECIFICATIONS FOR THE LTF SENSOR
Required Overcurrent Protection
WARNING: Electrical connections must be made by qualified personnel in accordance with local and national electrical codes and regulations.
Overcurrent protection is required to be provided by end product application per the supplied table.
Overcurrent protection may be provided with external fusing or via Current Limiting, Class 2 Power Supply.
Supply wiring leads < 24 AWG shall not be spliced.
For additional product support, go to www.bannerengineering.com.
6.1. Repeatability Performance
Banner Engineering BV Park
Lane, Culliganlaan 2F bus 3,
1831 Diegem, BELGIUM
Turck Banner LTD Blenheim
House, Blenheim Court,
Wickford, Essex SS11 8YT,
Great Britain
Supply Wiring (AWG) Required Overcurrent Protection (A) Supply Wiring (AWG) Required Overcurrent Protection (A)
20 5.0 26 1.0
22 3.0 28 0.8
24 1.0 30 0.5
LTF12 Models
Figure 1: Speed: Slow (256 ms)
Figure 2: Speed: Medium (32 ms)
Figure 3: Speed: Standard (8 ms) Figure 4: Speed: Fast (1.5 ms)
Industrial
Control
Equipment
3TJJ
6% Black Card
18% Gray Card
90% White Card
Distance in m (ft)
02
(6.6)
4
(13.12)
6
(19.7)
8
(26.2)
10
(32.8)
12
(39.4)
0
2 (0.08)
4 (0.16)
6 (0.24)
8 (0.31)
10 (0.39)
12 (0.47)
14 (0.55)
1σ Repeatability in mm (inch)
Beyond Specified Range
6% Black Card
18% Gray Card
90% White Card
Distance in m (ft)
02
(6.6)
4
(13.12)
6
(19.7)
8
(26.2)
10
(32.8)
12
(39.4)
0
2 (0.08)
4 (0.16)
6 (0.24)
8 (0.31)
10 (0.39)
12 (0.47)
14 (0.55)
1σ Repeatability in mm (inch)
Beyond Specified Range
0
2 (0.08)
4 (0.16)
6 (0.24)
8 (0.31)
10 (0.39)
12 (0.47)
14 (0.55)
6% Black Card
18% Gray Card
90% White Card
1σ Repeatability in mm (inch)
Distance in m (ft)
02
(6.6)
4
(13.12)
6
(19.7)
8
(26.2)
10
(32.8)
12
(39.4)
02
(6.6)
4
(13.12)
6
(19.7)
8
(26.2)
10
(32.8)
12
(39.4)
Distance in m (ft)
6% Black Card
18% Gray Card
90% White Card
0
2 (0.08)
4 (0.16)
6 (0.24)
8 (0.31)
10 (0.39)
12 (0.47)
14 (0.55)
1σ Repeatability in mm (inch)