P/N 133487 107
Banner Engineering Corp. • Minneapolis, U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
SC22-3 Safety Controller
Instruction Manual
Appendix B
Add a Status Output
• Click on the Status Output button in the tool bar (or
double-left click on the O1 icon in the properties field of the
screen).
The O1 Properties pop-up menu will appear.
• Configure status output O1 with the properties listed below.
Name: ES01
Function: Track input
A drop-down Source field will now appear.
Source: ES01
Signal Convention: 24V dc = Run
(When ES01 is in the Run state, O1 will be at 24V dc.
When ES01 is in the Stop state, O1 will be at 0V dc.)
• Click OK.
To Next Page
Loading...
