108 P/N 133487
Banner Engineering Corp. • Minneapolis, U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
SC22-3 Safety Controller
Instruction Manual
Appendix B
Add Another Status Output
• Select status output O2
• Configure status output O2 with the properties listed below.
Name: Need Reset
Function: Output waiting for Reset
Source: SO1
Signal Convention: 24V dc = Reset needed
• Click OK.
The Wiring Diagram should now look like this:
The Ladder Logic Diagram should now look like this:
To Next Page
Loading...
