Banner SC22-3 - Review the Configuration; Review Terminal Assignments; Review Input;Output Mapping; Review Status Output Settings

P/N 133487 119
Banner Engineering Corp. • Minneapolis, U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
SC22-3 Safety Controller
Instruction Manual
Appendix C
Configure Status Output 02
Name: NEED RESET
Function:
Source:
When the last status output has been configured, return to the
Edit Configuration menu by pressing ESC.
Edit Inputs menu
ESC→
Edit Configuration menu
Review the Configuration
Prior to saving the newly created configuration, review it by
selecting Configuration Summary and pressing OK.
The Configuration Summary menu allows you to:
• Review the input circuit and terminal assignments for each
input
• Review the mapping assignments of each input
• Review the configuration of each status output
Review Terminal Assignments
Select Terminal Assignments and press OK.
The display shows the terminal assignments for the first input. Use
the left/right arrow keys to view the terminal assignments for the other
inputs.
When finished, press either OK or ESC.
Review Input/Output Mapping
Select Input/Output Mapping and press OK.
The display shows the input/output mapping for the first input. Use
the left/right arrow keys to view the other inputs.
When finished, press either OK or ESC.
Review Status Output Settings
Select Status Output Settings and press OK.
The display shows the first status output. Use the left/right arrow keys
to view the other status outputs.
When finished, press either OK or ESC.
When finished reviewing the configuration summary, return to the Edit
Configuration menu by pressing ESC.