Barco PHWU-81B User Manual

Trademark, Registered trademark
• DLP®, Digital Micromirror Device, DMD and BrilliantColor™ are all trademarks of Texas Instruments.
• HDMI, the HDMI logo and High-Definition M ultimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
• Microsoft, Windows and W indows Vista are either registered trademarks or tradem arks of Microsoft Co rporation in the United States
and/or other countries.
• Mac is a registered trademark of A pple Inc.
• The trademark of PJLink is trademark applied for registration or registered trademark in Japan, the U nited States, and other countries
and areas.
• Crestron RoomView Connected is a trademark of Crestron Electronics, Inc.
• Other brand or product names a re trademarks or registered trademarks of their r espective holders.
Copyright ©
All rights reserved. No part of this documen t m ay be copied, reproduced or translated. It shall not otherwise be recorded, transmitted or
stored in a retrieval system without the prior written con sent of Barco.
Federal Communications Commission (FCC Statement)
This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to Par t 15 of the FCC rules.
These limits are designed to provide reasonable protection against harm ful interference when the equipm ent is operated in a com m ercial
environment. T his eq uipment generates, uses, and can radiate radio frequency ener gy and , if not installed and used in accordance with
the instruction m anual, may cause harmful interference to radio communications. Oper ation of this equipment in a residential area may
cause harmful interference, in which case the user will b e responsible for correcting any interference at his own expense
Changes or modifications not expressly approved by the party responsible for co
mpliance could void the user ’s authority to ope rate the
equipment
EN55022/CISPR22 Class A ITE (Informa tion Technology Equipment)
Class A ITE is a category of all other ITE which satisfies the class A ITE limits but not the class B IT E limits. Such equipment should not
be restricted in its sale but the following warning shall be included in the ins tructions for use:
Warning : This is a class A product. In a dom estic env ironment this product m ay cause radio interference in which case the user m ay be
required to take adequate measures.

Barco PHWU-81B Specifications

General

Matrix size	0.67 \
Matrix type	DMD
Native aspect ratio	16:10
Projection distance	- m
Projection technology	DLP
Contrast ratio (typical)	2800:1
Screen size compatibility	- \
Projector native resolution	WUXGA (1920x1200)
Projector brightness (economic mode)	5450 ANSI lumens
Focal length range	- mm
Lamp power	350 W
Lamps quantity	2 lamp(s)
Light source type	Lamp
Service life of light source	2000 h
Service life of light source (economic mode)	4000 h
Full HD	No
Supported graphics resolutions	1920 x 1200 (WUXGA)
BNC input ports	5
Serial interface type	RS-232
USB 2.0 ports quantity	0
Ethernet LAN data rates	10, 100 Mbit/s
I/O ports	SDI
Noise level	44 dB
Noise level (economic mode)	39 dB
Placement	Desktop, Ceiling
Product type	Large venue projector
Product color	Black, White
Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	910 W
Power consumption (standby)	0.3 W
Power consumption (economy mode)	690 W
Operating temperature (T-T)	5 - 40 °C
Operating relative humidity (H-H)	30 - 90 %

Weight and Dimensions

Depth	660 mm
Width	510 mm
Height	263 mm
Weight	21000 g
Package depth	840 mm
Package width	650 mm
Package height	415 mm
Package weight	26500 g