5. Advanced menu
Item
Setting
Function
FILM
Fixedtothefilm mode.
VIDEO The film mode will not be activated.
LANGUAGE Different languages
Use to select the language used in the menus.
ADVANCED MENU
ENTER
The ADVA NCED MENU is displayed for t he following settings.
VIDEO SIGNAL AUTO / NTSC / PAL /
SECAM / 4.43NTSC /
PAL-M / PAL-N / PAL-60
When AUTO is selected, the appropriate video format is automatically
selected depending on the input s ignal. If the im age isn’t displayed
correctly, select the desired video format manually.
SETUP AUTO Select to change the SETUP mode automatically.
OFF Select to make black lighter.
3.75% / 7.5% Select to make black thicker.
When 7.5% is chosen, the brightness is decreased by the setup cancel
function for the U.S. Choose O FF when the image is dark.
SCART INPUT ON / OFF Choose ON when connecting the projector with a dev ice equipped
with the SCART terminal that can ou tput RG B signal. SCART term inal
is used mainly in Europe. Choose O F F no rmally. (Available only for
the input signal from the CO M PUTER /COM PONE NT VIDEO IN-1
terminal.)
LAMP WARNING STANDARD When the lam p operating time exceeds 3 000 hours with LAM P MOD E
set to L O W, a w ar ning dialog is displayed.
SHORT TERM When the lamp op erating time exceeds 3800 hours with LAMP M OD E
set to L O W, a w ar ning dialog is displayed.
HIDE OS D OFF Select this option for normal use.
ON The auto power-off dialog, lamp warning dialog, and abnormal
temperature dialog a ren’t displayed.
LAMP 1 TIME RESET
OK
The LAMP 1 op eration time is reset to 0 .
LAMP 2 TIME RESET
OK
The LAMP 2 op eration time is reset to 0 .
FILTER TIME RESET
OK
The filter operation time is reset to 0.
RESET ALL
OK
The menu settings are r eset to the f actory defaults (ex cept the
LANGUAGE, PASSWORD FUNC TION, SCREEN, and NE TWORK
setting s).
• CINEMA MO DE can be adjusted only when a TV60, T V 50, 480i, 576i or 1080i signal is being displayed.
• When S CART INP UT is set to ON, normal computer signals aren’t projected.
• Use a c omm ercially available S CART-M in
i D-SUB 15-pin cable w hen c onnecting this projector with an AV de vice equipped with
the SCART terminal.
• Some AV devices equipped with the SCA RT terminal aren’t compatible with this projector.
• The RES ET ALL process may take som e time to complete.
• You cannot carry out RE SE T ALL for approx. 2 minutes after the lam p switching or the lam p relay operation.
48
R5905597 PHXX SERIES 20/05/2014
To Next Page
Loading...
Need help?
General
Weight and Dimensions
