5. Advanced menu
Item Description
LAMP 2 TIME (LO W ) This item shows the lamp operation time calculated based on that the LAMP MODE of LAMP
2isLOW.
→ When the LAMP MODE is STANDARD, this item shows a longer lamp oper ating time than
the actual time.
→ When the lam p operating time is 0 to 10 hours, “0H” is displayed. The lamp operating time
exceeding 10 hours is indicated by the actual hours.
→ When the lamp operating time reaches 3 000 hours, the bar turns to y ellow. When it reaches
3800 hours, the bar turns to re d.
→ The icon displayed to the right of the bar shows the lamp status. Yellow: On, Red: End of lam p
life or error such as illumination failure, Black: Off
NEXT LAMP RELAY The next lamp relay time is displayed.
FILTER TIME
The filter operation time is displayed.
SERIAL NUM BE R The serial number of the pr ojector is displayed.
INPUT
Indicates the name of the terminal to which the currently projected v ideo signal is being input.
RESOLUTION Indicates the resolution of the currently projected video signal.
VERTICAL FR E QUENCY Indicates the vertical frequency of the currently projected video signal.
HORIZONTAL
FREQUENCY
Indicates the hor izontal frequency of the currently projected video signal.
SYNC. TYP E Indicates the type of the sync signal for the currently projected v ideo signal.
• NEXT LAMP RELAY isn’t displayed when LAMP RELAY is OFF or LA MP SELECT is LA MP 1 or LAMP 2 in the INSTALLATION
1 menu.
R5905597 PHXX SERIES 20/05/2014
53
To Next Page
Loading...
