Barco PHWU-81B User Manual

8. Lamp relay
→ When you select 1H/24H or 2H/1W , the box to se t the lamp re lay interval is d isplayed.
→ When the projector is turned off, the setting is cleared and the projector resumes operation from the time of the power-on or
menu setting shown in the preceding step.
1H/24H
23H
0
OK
CLEAR
DEL
CANCEL
123456 78 9
← →
NEXT LAMP RELAY
Image 8-6
2H/1W
0
OK
CLEAR
DEL
CANCEL
123456 78 9
← →
6D 22H
NEXT LAMP RELAY
Image 8-7
9. Move the key cursor using the direction keys to select the number you want to enter and then press the ENTER key.
→ Maximum interval
1H/24H
23H (23 hours)
2H/1W
6D 22H (6 days and 22 hours)
← key Shifting the p osition of enter cursor to the left for each c haracter.
→ key Shifting the position of enter cursor to the right for each c haracter.
DEL k ey Deleting the character in the position of enter cursor for each character.
CLEAR ke y Deleting all the entered c haracters.
→ W hen the value you e ntered meets the following conditions, an error dialog box is displayed at the s creen center.
- The value has been cleared by DEL or CLE AR and left blank.
- The value yo u entered is out of the setting range.
1H/24H
24H or over
2H/1W
6D 23H or over
→ The value of each item is out of the setting range.
D
7orover(2H/1W
only)
H24orover
10.When select ing OK, the setting is com pleted as the lamp-switching interval stored. However, when selecting CANCEL,thesetting
is completed without storing.
→ The display r eturns the LAMP RELAY menu after selecting OK or CANCEL.
→ The setting y ou made is applied to NEXT LAMP RE LAY in t he INFORM ATION menu.
Important
• When you use the projector continuously, the lamp relay may n ot be performed on time d ue to errors of the clock function.
• Immediately after the power-on, during the lamp selection, or during the lamp r elay operation, you cannot change the s etting
of LA MP SELECT and LAMP RELAY.
• In the case of continuous projection, the lam ps may deteriorate earlier unles s they are turned off for 1 hour per w eek.
• When using this projector continuously for a long time o f period, enable LAMP RELAY.
• The brightness and color tint vary at the time of lamp switching.
82
R5905597 PHXX SERIES 20/05/2014

Barco PHWU-81B Specifications

General

Matrix size	0.67 \
Matrix type	DMD
Native aspect ratio	16:10
Projection distance	- m
Projection technology	DLP
Contrast ratio (typical)	2800:1
Screen size compatibility	- \
Projector native resolution	WUXGA (1920x1200)
Projector brightness (economic mode)	5450 ANSI lumens
Focal length range	- mm
Lamp power	350 W
Lamps quantity	2 lamp(s)
Light source type	Lamp
Service life of light source	2000 h
Service life of light source (economic mode)	4000 h
Full HD	No
Supported graphics resolutions	1920 x 1200 (WUXGA)
BNC input ports	5
Serial interface type	RS-232
USB 2.0 ports quantity	0
Ethernet LAN data rates	10, 100 Mbit/s
I/O ports	SDI
Noise level	44 dB
Noise level (economic mode)	39 dB
Placement	Desktop, Ceiling
Product type	Large venue projector
Product color	Black, White
Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	910 W
Power consumption (standby)	0.3 W
Power consumption (economy mode)	690 W
Operating temperature (T-T)	5 - 40 °C
Operating relative humidity (H-H)	30 - 90 %

Weight and Dimensions

Depth	660 mm
Width	510 mm
Height	263 mm
Weight	21000 g
Package depth	840 mm
Package width	650 mm
Package height	415 mm
Package weight	26500 g