7. Basic setup procedures
1
3
2
1
3
2
Image 7-14
7. Join the truss beams sideways together as illustra
ted.
a) remove the fork (reference 1 image 7-15) from the truss beam
b) slide the inner frame (reference 3 image 7-15) into the neighboring truss beam
c) install the fork (reference 1 image 7-15) and secure this position with two spring cotters (reference 2 image 7-15).
3
1
2
Image 7-15
8. Repeat this procedure until all truss beams are installed and all rental tiles in the first row are sideways locked with each other.
50
R5905160 X8 RENTAL DISPLAY 25/02/2013
To Next Page
Loading...
