Basler ace CL User Manual

AW00061111000 Installing a GigE Camera
Installation and Setup Guide for ace CL, aviator, beat, pilot, racer, runner, and scout Cameras (Windows) 35
 Vendor - The name of the camera vendor.
 Model Name - The name of the camera model.
 Device User ID - A user-defined identifier for the camera (if one has been assigned).
 Serial Number - The serial number of the camera.
 MAC Address - The MAC address of the camera.
 IP Configuration - The method used for assigning the current IP address to the camera.
 IP Address - The current IP address of the camera.
 Subnet Mask - The subnet mask of the camera.
 Gateway - The gateway used by the camera, if applicable.
To the right of the camera information is a Refresh button. If you click it, the tool will update the
displayed network adapter and camera information. This way you can make sure that all of the
displayed information is current.
Hint text is displayed in the lower right area of the window. For example, if a camera is not reachable
because of a problem with the IP address, the hint text will tell you how to fix the problem. The
following figure shows an example:
The pane in the lower left area of the window contains controls for changing the IP configuration
and the device user ID of the camera. Changing the camera’s IP configuration will be explained in
the following sections. To change the device user ID of the camera, use the following procedure:
Hint Text

Basler ace CL Specifications

General

Brand	Basler
Model	ace CL
Category	Security Camera
Language	English