AW00118303000 Specifications, Requirements, and Precautions
Basler racer GigE 5
Specification raL12288-8gm
Sensor Size
(Maximum Resolution)
12288 pixels
Sensor Type Awaiba DR-12k-3.5
Monochrome Linear CMOS
Pixel Size 3.5 µm x 3.5 µm
Max Line Rate 8 kHz
Min Line Rate No minimum when an external line trigger signal is used
100 Hz when an external line trigger signal is not used
Mono/Color Mono
Data Output Type Fast Ethernet (100 Mbit/s) or Gigabit Ethernet (1000 Mbit/s)
Pixel Data
Formats
Mono 8
Mono 12
Mono 12 Packed
YUV 4:2:2 Packed
YUV 4:2:2 (YUYV) Packed
ADC Bit Depth 12 bit
Synchronization Via external trigger signal, via software or free run
Exposure Control Programmable via the camera API
Camera Power
Requirements
+12 VDC (- 10 %) to +24 VDC (+ 5 %), < 1 % ripple, supplied via the camera’s 6-pin
connector
Max Power Consumption
(at 12 VDC)
< 6.5 W
I/O Lines 3 input lines and 2 output lines
Lens Adapter Universal camera front, suitable for F-mount and M42 (×1.0 or ×0.75) adapter. Lens
adapter is not in the camera’s scope of delivery and must be ordered separately as
an accessory. See Section 1.4.4 on page 12 for information about selecting a
suitable lens adapter for your camera.
Size
(L x W x H)
36.2 mm x 56 mm x 62 mm (without lens adapter or connectors)
79.9 mm x 56 mm x 62 mm (with F-mount lens adapter and connectors)
49.5 mm x 56 mm x 62 mm (with M42-mount lens adapter and connectors)
Weight ~ 240 g (typical) without lens adapter
~ 330 g (typical) with F-mount lens adapter and connectors
~ 260 g (typical) with M42-mount lens adapter and connectors
Conformity CE, RoHS, FCC, UL (in preparation), GenICam, GigE Vision, IP30
Table 3: General Specifications - 12k Mono Cameras
To Next Page
Loading...
