EasyManua.ls Logo

Bauer Compressors Oceanus - Oceanus-G; Compressor Block Technical Specifications; Compressor Drive Technical Specifications

Bauer Compressors Oceanus
85 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MNL-0295
August 27, 2009 Page 11
1.5.3 Oceanus-G
Medium Air
Intake Pressure Atmospheric
Charging Rate
1
4.9 SCFM
Free Air Delivery
2
4.1 SCFM
Maximum Operating Pressure 5,000 psi (350 bar)
Weight approx. 96 lbs (44 kg)
1.5.3.1 Compressor Block Technical Specifications
Number of stages 3
Number of cylinders 3
1st Stage Cylinder Bore 2.75 in (70mm)
2nd Stage Cylinder Bore 1.10 in (28mm)
3rd Stage Cylinder Bore 0.47 in (12mm)
Piston Stroke 0.95 in (24 mm)
Intermediate Pressure 1st stage 87 psig (6 bar)
Intermediate Pressure 2nd stage 653 - 798 psig (45 - 55 bar)
Compressor Block Oil Capacity 1.4 qts. (1.3 ltrs)
Ambient Temperature Range 43 - 113 °F (5 - 45 °C)
Maximum Permissible Inclination of Compressor
3
20°
1.5.3.2 Compressor Drive Technical Specifications
Drive Engine P/N ENG-0082
Horsepower 6.0 HP
Speed 4,000 RPM
Type Gasoline, Manual Start
1. Based on recharging an 80 cubic foot tank from 500 to 3,000 psig
2. Compressor capacity referenced to standard conditions of 68°F, 60% Humidity at sea level.
3. This value is valid only if the compressor block oil in normal level position corresponds with the upper mark of the oil dipstick and may not be exceeded.

Table of Contents

Related product manuals