Bauer BG 25 - Mounting the Kelly

RIGGING / DE-RIGGING
BG 25 / 2011 / 2254_BG25_en_0000498763_V01
7 - 20
7.6.1.4 Mounting the Kelly
NOTE
To mount the Kelly, the mast must be in upright position and be fitted
with the rotary drive.
 Lay the Kelly bar down lengthwise to front of the machine, in the centerline of the
machine.
NOTE
Suspension eye on Kelly must face the machine.
 Mount rope swivel to eye on Kelly, in accor-
dance with fig. below.
1 Main rope
2 Rope swivel
3 Pin
4 Kelly
5 Lock washer
6 Hex head bolt
7 Washer
8 Lube nipple
1
2
4
3
5
6
7
8
B0000621.wmf
 Move rotary drive to lowermost position.
 Tilt mast forward by approx. 2 - 3°.
 By the main winch, lift the Kelly as shown to
right and at the same time travel with the
machine towards the Kelly.
B0000622.wmf
CAUTION
Risk of damaging components!
Keep the main rope vertical at all times.