Bauer BG 25 - Mounting Casing Oscillator

RIGGING / DE-RIGGING
BG 25 / 2011 / 2254_BG25_en_0000498763_V01
7 - 22
7.6.2 Mounting Casing Oscillator *
NOTE
How to mount a casing oscillator to the machine is described in the
separate manual belonging to the casing oscillator in question.
 Pass hoses from casing oscillator over
left and right crawler crossbeam up to
bulkheads "A".
A
BM779507.wmf
 Stop the engine of the base machine.
 Remove dust caps from hydraulic connections.
 Mount the hydraulic couplings in compliance with the provided numbers.
 Make electric connection of casing oscillator and base machine.
View "A":
Undercarriage seen from the rear. The identified couplings are found on the front side
of the two bulkheads.
BM779414.jpg
20 Oscillation [P]
21 Oscillation [R]
22 Unclamping
23 Clamping
24 Lowering
25 Lifting
28 Locking
29 Unlocking
30 Leak oil [T] (optional)
PST Pilotoil (optional)
E1 Electric connection (optional)
*) Not used in this version