BG 25 / 2011 / 2254_BG25_en_0000498763_V01
7.10 RETRACTING THE CRAWLERS
Squashing hazard, shearing hazard and drawing-in hazard!
The machine must be out of motion during work on the undercarriage.
A reliable communication between person at undercarriage and opera-
tor in cab must be provided at all times.
The danger zone must be cleared before crawlers are retracted.
Do not retract the right and left crawler simultaneously.
On both crawlers, clean and grease the
sliding surfaces (3).
On one crawler, remove retainers (2)
and remove pins (1) from the lock posi-
tion B.
By button Bk19030013.wmf
retract the crawler while travelling for-
ward and reverse.
Reinstall the pins (1) at the position A",
and secure the pins with retainers (2).
Repeat the procedure with the other
crawler.
BV737445.jpg
BV737516.jpg
To Next Page
Loading...
