BG 25 / 2011 / 2254_BG25_en_0000498763_V01
7.4 MOUNTING THE COUNTERWEIGHT
Tipping hazard!
The machine must be fitted with the appropriate counterweight before
rigging operations are begun.
The counterweight(s) must remain unchanged and installed as long as
the machine is rigged.
Severe accident hazard!
No person must stand on or under a counterweight while it is being
mounted.
Persons working on the upper carriage must wear a fall protection belt
secured to the upper carriage (red painted loop).
Severe accident hazard!
Each time the counterweight is mounted, the mounting bolts must be
additionally checked after 50 operating hours with the specified torque.
Risk of damaging components!
Counterweights consisting of several parts are to be transported in
upright position.
For further information please refer to the documentation supplied
with the base machine.
To Next Page
Loading...
