BG 25 / 2011 / 2254_BG25_en_0000498763_V01
3.5 ROPE SPECIFICATIONS
3.5.1 Main Rope
Accident risk!
Ropes breaking can cause serious accidents.
Ropes installed in hoist winches must have a minimum breaking load
which is at least three times the winch pull force.
The ropes' safety factors must comply with the standards required for the equipment
and must be observed.
Technical data:
Finished length 88 m
Diameter 28.00 mm
Characteristics:
Lay and direction Regular lay, right (sZ)
Rotation characteristics Non-rotating
Rope end characteristics Pointed, full thimble
To Next Page
Loading...
