Bauer BG 25 - Greasing the Shaft Seal Ring

MAINTENANCE
BG 25 / 2011 / 2254_BG25_en_0000498763_V01
9 - 40
9.10.9 Greasing the Shaft Seal Ring
Every 10 operating hours or daily:
 Clean the rotary drive.
 Apply grease to nipples (1 or 2) and
rotate the drive in between, from time
to time.
 Repeat the procedure until grease
exits steadily along the whole circum-
ference (arrow).
3
4
1
2
3
4
K0000515.wmf
CAUTION
Risk of damaging the rotary drive!
Insufficient greasing can allow solid matters to enter into the gears and
cause damage.
CAUTION
Risk of damaging the rotary drive!
Brownish coloured gear oil or a heavily contaminated filter (3 or 4) can
be an indicator of solid matters brought-in from the outside.
Shut down the rotary drive and contact the After Sales Service.