Bauer BG 25 - 4 Controls and Indicators; Cab

CONTROLS AND INDICATORS
BG 25 / 2011 / 2254_BG25_en_0000498763_V01
4 - 1
4 CONTROLS AND INDICATORS
4.1 CAB
3
9
1.1
10.3
10.4
10.2
10.1
10.5
10.6
15.3
15.4
15.2
15.1
15.5
15.6
21
10.7
10.8
6
20
1.3
1.5
1.6
1.4
1.2
2.3
2.2
2.1
0
1
5
4
16
12
11
17
18
19
8
7
BK18685002.wmf
1.1 Left crawler travel forward
1.2 Left crawler travel reverse
1.3 In CO mode: Tube lower *
1.4 In CO mode: Tube lift *
1.5 In CO mode + Clamping cylinders selected:
Tube unclamp *
1.6 In CO mode + Clamping cylinders selected:
Tube clamp *
2.1 Right crawler travel forward
2.2 Right crawler travel reverse
2.3 In CO mode: Oscillate *
3 Free-fall/Freewheel release
4 Free-fall/Freewheel mode ON/OFF
5 Not used
6 Crowd fast mode ON
7 In Kelly/CFA mode + preselection of high torque:
KDK fast mode ON/OFF
8 In Kelly mode: Dump spoil
9 Horn ON
10.1 Crowd down
10.2 Crowd up
10.3 In Kelly/CFA mode: Rotary drive rotate right
10.4 In Kelly/CFA mode: Rotary drive rotate left
10.5 Rigging mode + Backstay cylinders selected:
Right backstay cylinder extend
10.6 Rigging mode + Backstay cylinders
selected: Right backstay cylinder retract
10.7 Rigging mode + Boom cylinders selected:
Boom cylinders retract
10.8 Rigging mode + Boom cylinders selected:
Boom cylinders extend
11 Engine speed adjustment
12 Engine ignition ON/OFF
15.1 Winch 1 / 2 down
15.2 Winch 1 / 2 up
15.3 Uppercarriage swing to left
15.4 Uppercarriage swing to right
15.5 Rigging mode + Backstay cylinders selected:
Left backstay cylinder extend
15.6 Rigging mode + Backstay cylinders selected:
Left backstay cylinder retract
16 Emergency STOP
17 Auger cleaner retract/extend *
18 Swing brake release
19 Swing brake apply
20 Free-fall/Freewheel release
21 Pilot control ON/OFF
CFA = Continuous Flight Auger
CO = Casing Oscillator
* = Not used in this version