BG 25 / 2011 / 2254_BG25_en_0000498763_V01
7.2 WAX REMOVAL
Prior to putting into service, remove all protecting wax with a hot water jet, at a tem-
perature of 90°C - 95°C (approx. 200°F).
Alternatively, the equipment can be washed down with a cold water de-
tergent.
The treatment must be repeated until all the equipment is totally free of
wax.
Risk of damaging components!
Detergents used must not be harmful to seals etc.
Check detergents for their areas of application prior to use.
To Next Page
Loading...
