Bauer BG 25 - Depth Measuring Control; To Reset the Depth Measuring

OPERATION
BG 25 / 2011 / 2254_BG25_en_0000498763_V01
5 - 17
5.8 DEPTH MEASURING CONTROL
5.8.1 To Reset the Depth Measuring
 Place drilling tool in desired position.
 Press button " D=0 " (2), to reset the
depth indicator to "0".
1
2
BK15155011.wmf
Depth 1 = Depth of main winch
Depth 2 = Depth of crowd
NOTE
The depth measuring may be reset to zero at any time.
NOTE
For more details please refer to the supplementary documentation sup-
plied with equipment.