Bauer BG 25 - Hollow Shaft Mounting Bolts

MAINTENANCE
BG 25 / 2011 / 2254_BG25_en_0000498763_V01
9 - 36
9.10.5 Hollow Shaft Mounting Bolts
The mounting bolts of the hollow shaft must be checked every time the oil of the rotary
drive is changed.
 Unscrew and remove access plugs (1).
 Visually, check the mounting bolts (2)
are properly in place and firm.
2
1
1
1
B0000750.wmf
CAUTION
Risk of damaging the
drive!
Do not re-tension these
bolts unless necessary or
the Loctite seal of the bolts
will break making the bolts
loosen during operation.
Check visually only. Do not
put fingers into the bores.
NOTE
Turning around the rotary
drive enables checking all
the bolts.
 Unscrew mounting bolts found to be
loose, clean them and apply Loctite to
threads, reinstall and tension the bolts
with the specified torque.
Bolt torque value
M
a
[Nm]
Hollow shaft mounting (2)
Hex head bolts
see Spare Parts List