Bauer BG 25 - Removing the Upper Crowd Rope

RIGGING / DE-RIGGING
BG 25 / 2011 / 2254_BG25_en_0000498763_V01
7 - 27
7.8.3.2 Removing the Upper Crowd Rope
NOTE
To remove the rope, the mast must be lying.
8
9
9
8
14 13
7 6 2 1
3
3
3
1
11
7 6 2
6 2 410
4108/9 12
12
15
X
Y
"X"
"Y"
16
16
BK587507.wmf
 Move crowd sledge into position for transport (see fig.).
 Remove sledge upper end stoppers from upper mast section and reinstall into
transport position (16).
 Completely extend the rope tensioning cylinder (7).
 Remove the rope clip (14).
 At the rope tensioning cylinder, remove the pin from the rope end socket (15).
 Knock the wedge (13) out, to relieve the rope, and pull the rope out of the socket.
 Remove the entire rope.
 Coil the rope loosely and fix it to the lower end of the mast.