BG 25 / 2011 / 2254_BG25_en_0000498763_V01
5.3.1 Mast Auto Reset to Vertical
Risk of damaging components!
Neither the mast prop nor components of the drilling equipment may be
in touch with the ground when the "Mast Auto Reset" is actuated.
Press Botton "AT" (1) and hold on.
The mast sets to vertical position.
Releasing the button too soon stops the action.
The mast will first set to vertical position in the X axis and then, after a
pause, in the Y axis.
For more details please refer to the supplementary documentation
supplied with equipment.
To Next Page
Loading...
