BG 25 / 2011 / 2254_BG25_en_0000498763_V01
9.10.3.2 Planetary Gears
The oil in the two planetary gears must be changed after the first 250 operating hours
and subsequently every 1000 operating hours or once a year.
To carry out an oil change, the oil had better be as warm as possible
from operating.
To change the oil:
Shut down the rotary drive.
Set rotary drive to upright position
Unscrew filler screws (2).
Have an oil collecting container ready.
Fit a plastic tube or hose of suitable size and
length from the drain to the container!
Unscrew drain screws (1) and let the oil out.
Danger of scalding!
Hot gear oil can cause severe injury!
To Next Page
Loading...
