Bauer BG 25 - Page 127

MAINTENANCE
BG 25 / 2011 / 2254_BG25_en_0000498763_V01
9 - 5
Table Attachment
Components
Maintenance interval
Operation
10 h
daily
50 h
weekly
250 h
monthly
500 h
3 months
1000 h
yearly
2000 h
yearly
3000 h/
every
2 years
Note
Wire rope and accessories
Ropes, rope fasteners,
thimbles and sleeves
- Inspect for wear and damage
X
Rope swivel
- Lubricate
X
- Check if bolts are secure
X
- Check slew function
X
Rope hold-down rollers
- Check parallel position to cable
drum
X
- Inspect for wear and damage
X
Rope sheaves
- Inspect for wear, damage,
and if bearing gap is exceeded
X
- Check sheaves are free to rotate
X
- Check if bolts are secure
X
- Check groove radii for
deviation and edge formation
X
- Put grease in lube nipples,
where fitted:
- Rope sheaves with friction
bearing
- Rope sheaves with roller
bearings
X
X
Rope roller brackets
- Ensure that mounting bolts of the
turning blocks are firm,
tighten bolts
X*
- Replace mounting bolts of the
turning blocks
10000 hrs
* Only during running-in period