BG 25 / 2011 / 2254_BG25_en_0000498763_V01
Main winch
Type 77 WH 102/13
Serial number 72810
Pulling force (1st layer) 200 kN
Rope diameter 28 mm
Rope length 88 m
Rope speed 87 m/min
("lifting" with a load of 80 kN)
Auxiliary winch
Type 4.22 1000328
Serial number 1028
Pulling force (1st layer) 80 kN
Rope diameter 20 mm
Rope length 50 m
Rope speed 55 m/min
("lifting" with a load of 10 kN)
Crowd winch
Type 4.261001908
Serial number 623
Max. stroke of crowd sledge 8,145 mm (with Kelly-system)
Max. pushing force at crowd sledge 260 kN
Max. pulling force at crowd sledge 260 kN
Rope diameter 24 mm
Length of upper/lower rope without mast extension 65 / 60 m
Crowd speed:
"Fast crowd up" 21.4 m/min
"Fast crowd down" 21.4 m/min
"Slow crowd up" 5.9 m/min
"Slow crowd down" 5.9 m/min
To Next Page
Loading...
