BG 25 / 2011 / 2254_BG25_en_0000498763_V01
Bolt the mast section (6) to the lower mast section (5) in the manner shown here.
Bolt tightening torque value Ma [Nm]:
1900
1 Hex head bolt
2 Washer
3 Hex nut
4 Lock nut
5 Lower mast section
6 Upper mast section
Remove transport supports.
Make hydraulic connections between the mast sections.
Make electric connections between the
mast sections.
To do so, remove plug (1) of electric ca-
ble from transport socket (2) and plug it
to the next mast section.
Check on the ladder that fall protection
rail (3) transfer points are in line. Read-
just at the ladder mounting points (4) as
necessary.
Danger of falling!
The lanyard can slip out of
its rail.
Precisely adjust transfer
points.
To Next Page
Loading...
