Baumuller b maXX 1000 - Page 37

Parameter
Parameter manual b maXX
®
1000
Document no. 5.07004.03
37
of 208
4
P0242
Procedures for troubleshooting and for additional information see chapter ’Troubleshoot-
ing’ in the manual b maXX
®
1000.
Here are the next five most recent faults that occurred, are stored. After removing the
cause of the fault, use the reset command to reset the drive, fault list see ZP0240– on
page 35.
P0243
Procedures for troubleshooting and for additional information see chapter ’Troubleshoot-
ing’ in the manual b maXX
®
1000.
Here are the next five most recent faults that occurred, are stored. After removing the
cause of the fault, use the reset command to reset the drive, fault list see ZP0240– on
page 35.
P0244
Procedures for troubleshooting and for additional information see chapter ’Troubleshoot-
ing’ in the manual b maXX
®
1000.
Here are the next five most recent faults that occurred, are stored. After removing the
cause of the fault, use the reset command to reset the drive, fault list see ZP0240– on
page 35.
P0242
Dritter aktueller Fehlerspeicher 0 to 052F
hex
- Third most recent fault record 0
A BM_u_ThirdFaultRecord 1:1 -
P0243
Vierter aktueller Fehlerspeicher 0 to 052F
hex
- Fourth most recent fault record 0
A BM_u_FourthFaultRecord 1:1 -
P0244
Fünfter aktueller Fehlerspeicher 0 to 052F
hex
- Fifth most recent fault record 0
A BM_u_FifthFaultRecord 1:1 -