Setting the pressure sensor inputs
Application handbook Servo pump function V1 for BM5000
Document No.: 5.17002.02 Baumüller Nürnberg GmbH
50
of 76
4.4
h By clicking on „Save all“ you can now save your settings in the Flash.
h By c
licking on „Upload“ you are able to save all your settings on a local computer.
Figure 57: Guided commissioning: Save data
h Click on „Continue“
An overview of all modified parameters is displayed.
Figure 58: Guided commissioning: Summary
h Click on „Finish“
The servo pump should now be able to run.
To Next Page
Loading...
