Baumuller b maXX BM4 Series Instruction

Instruction Handbook b maXX (BM4-F-)ENC-XX (Encoder module)
Document No.: 5.01042.12 Baumüller Nürnberg GmbH
96
of 102
EC - Declaration of Conformity Doc.-No.: 5.13028.00
Date: 18.10.2013
according to EMC Directive 2004/108/EC and
Low Voltage Directive 2006/95/EC
The Manufacturer: Baumüller Nürnberg GmbH
Ostendstraße 80-90
90482 Nürnberg, Deutschland
declares, that the product:
Designation: Encoder module for b maXX 4000 standard controller
Type: BM4-F-ENC-XX
Manufactured since: 18-Oct-2013
is developed, designed and manufactured in accordance with the EMC Directive 2004/108/EC and the Low Voltage Direc-
tive 2006/95/EC.
Applied harmonized standards:
The mentioned devices cannot be operated without a BM4000 standard controller.
The products must be installed correctly and all notes and safety notes of the referring instruction handbooks BM4000 and
the encoder module BM4-F-ENC-XX must be complied with, to guarantee the compliance to the guidelines.
The compliance to the guidelines was verified with a typical configuration of a BM4000 standard controller.
Nuremberg / 18.10.2013
Location/Date
Subject to change of this declaration of EC conformity without notice. Actual valid edition on request.
Standard Title
DIN EN 62061:2010-05 Safety of Machinery - Functional safety of safety-related electrical, electronic and programmable
electronic control systems
DIN EN 61800-5-1:2008-04 Adjustable speed electrical power drive
Part 5-1: Safety requirements
- Electrical, thermal and energy
DIN EN 61800-5-2:2008-04 Adjustable speed electrical power drive
Part 5-2: Safety requirements - Functional
DIN EN 61800-3:2005-07 Adjustable speed electrical power drive
Part 3: EMC requirements and specific test methods

Baumuller b maXX BM4 Series Specifications

General

Brand	Baumuller
Model	b maXX BM4 Series
Category	DC Drives
Language	English