Bayrol PoolManager Series - Part A: Overview; 1.1 Safety Information; 2 General Safety Information

1 Identification of safety information
User Manual PoolManager
®
6
Part A: Overview
1 Identification of safety information
1.1 Safety information
HAZARD!
Hazard identification
Hazard description
Description of (potential) consequences
Measure to be undertaken in order to avoid this hazard.
HAZARD DUE TO VOLTAGE!
Hazard identification
Hazard description
Description of (potential) consequences
Measure to be undertaken in order to avoid this hazard.
Required user qualification:
USER QUALIFICATION (description)
Explanatory text...
1.2 Miscellaneous markings
IMPORTANT NOTICE!
Brief description
Informational text...
+INFO
Brief description
Information…
INFO
The corresponding section applies only for the
PoolManager
®
version(s) indicated
TIP
Brief description
Tip...
• Chapter name (printed in italics) indicates a chapter within this
document
• Menu name (printed in italics) indicates a menu in PoolManager
®
• Parameter name (printed in italics) indicates a parameter in
PoolManager
®
• [n] (designation) indicates the number of a terminal block (in
squared brackets) and its designation (printed in italics in round
brackets)
• [Unit] indicates a format-filling physical unit frame
2 General safety information
This user manual has basic information that should be observed
during assembly, start-up, operation, and maintenance. Therefore, this
user manual absolutely must be read by installers and operators prior
to assembly and start/up, and must be accessible to every user of this
device. Additionally, all further safety information in this document
absolutely must be observed.
Read and follow all instructions.
In order to minimise the danger of injury, do not allow children to use
this product.
Hazards from non-compliance with safety information
Non-compliance with safety information can result in
hazards to persons, the environment, and the
equipment.
Non-compliance with safety information will result in a forfeit of any
potential right to damage compensation.
HAZARD!
Unexpected start
PoolManager
®
begins to run as soon as there is
voltage on the incoming power line. It is possible that
dosage pumps start or that supplemental functions are
turned on or switched.
Potential consequence: Death or the gravest degree
of injury, heavy material damage.
• Be sure that PoolManager
®
is secured against
unauthorised access.
• Do not supply PoolManager
®
with power until all
preparations for a safe start and safe operation
have been completed.
HAZARD!
Potential overdosing of maintenance products
Despite PoolManager's
®
comprehensive safety
functions, it's possible that a sensor failure and other
errors could lead to an overdosing
of maintenance
products.
Potential consequence: Death or the gravest degree
of injury, heavy material damage.
• Design your proces
s such that uncontrolled dosage
is not possible in the event of a sensor failure or
other errors, and/or such that uncontrolled dosage
is recognised and halted before damage is
incurred.
HAZARD!
Gaseous chlorine produced from dosing in standing
water if dosage outlets are not locked.
If the flow switch is stuck or experiences another errors,
there is a risk of dosing in standing water. Poisonous
chlorine gas can be yielded when ChloriLiquid and pH
minus come together.