Bayrol PoolManager Series - 36 Installation into Circulation System; 36.5.1 Connection with Circulation System

36 Installation into the circulation system
User Manual PoolManager
®
70
36 Installation into the circulation system
Depending on the maintenance method chosen, install PoolManager
®
on the circulation system as follows.
36.1 PoolManager
®
Chlorine installation diagram
1. PoolManager
®
Chlorine
2. Heat exchanger/Heating
3. Sand filter
4. Circulation pump
5. ChloriLiquid
6. pH minus / pH plus
36.2 PoolManager
®
Oxygen installation diagram
1. PoolManager
®
Oxygen
2. Heat exchanger/Heating
3. Sand filter
4. Circulation pump
5. BayroSoft
6. pH minus / pH plus
36.3 PoolManager
®
Bromine installation diagram
1. PoolManager
®
Bromine
2. Heat exchanger/Heating
3. Sand filter
4. Circulation pump
5. Magnet valve
6. pH minus / pH plus
7. Brominator
36.4 PoolManager
®
PRO installation diagram
1. PoolManager
®
PRO
2. Heat exchanger/Heating
3. Sand filter
4. Circulation pump
5. ChloriLiquid
6. pH minus / pH plus
36.5 PoolManager
®
installation
IMPORTANT NOTICE
Ensure that connections are sealed tightly for all hose
and assembly connections.
No liability for any leakage!
36.5.1 Connection with the circulation system
• Install the tapping saddles for measurement water extraction and
return and injection valves as shown in the diagrams.
• Use the Teflon tape provided to install measurement water
extraction and return, as well as injection valves.