EasyManua.ls Logo

Bayrol PoolManager Series - 4 Term Definitions; 5 Standard Access Codes

Bayrol PoolManager Series
95 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
Term definitions
User Manual PoolManager
®
8
4 Term definitions
Bromine (Br)
Active bromine (free bromine) in pools for disinfection, measured
in [mg/l]
Chlorine (Cl)
Active chlorine (free chlorine) in pools for disinfection, measured
in [mg/l]
Default value
Standard setting
Ethernet
Cable-connected standard TCP/IP network.
Flow
Measured water's flow through the measuring chamber
Network
Computer network that uses TCP/IP protocol The Internet is also
a TCP/IP network. PoolManager
®
is integrated into a TCP/IP
network.
Redox potential (mV)
Indirect measured variable for disinfection in pools, measured in
[mV]
Oxygen (O2)
Disinfection with active oxygen (BayroSoft)
TCP/IP
Standard protocol used on computer networks and on the Internet
(TCP = Transmission Control Protocol,
IP = Internet Protocol).
Web
World Wide Web (Internet, www)
Browser
Standard program for viewing websites (e.g. on a PC or on a
mobile device), also used for remote access to PoolManager
®
.
WebGUI
Web-(Internet)-based graphical user interface
(GUI = Graphical User Interface)
Web server
Program that transmits webpages to a browser.
PoolManager
®
has an integrated web server accessible to
browsers.
WLAN or WiFi
Wireless TCP/IP network / radio network
(WLAN = Wireless Local Area Network).
Dosage pumps
Used in the sense of "dosage pumps and other dosage
equipment"
5 Standard access codes
The following table indicates the standard default access codes.
HAZARD!
Unauthorised access possible from using known
access codes
Access codes facilitate access to critical areas on the
system. Unauthorised access can lead to dangerous
configurations.
Potential consequence: Death or the gravest
degree of injury, heavy material damage.
Configure individualised access codes. Under no
circumstances should the preconfigured standard
access codes be used.
Keep access codes strictly confidential.
Users Default access code
(must be changed!)
Customer (level 1) 1234
Customer (level 2) 9876
Service (level 3) 8642

Table of Contents

Related product manuals