To Next Page

To Previous Page

Page66

APPENDIX:TACACSCONNECTIONSCENERIOS

Different username and password in TACACS+ and power strip: TACACS+ username Login

 Case 1: TACACS+ enabled, TACACS+ contact good, “Enable URPC usernames as backup” = disabled,

TACACS username Log in OK. Log in validated by the TACACS+ server.

 Case 2: TACACS+ enabled, TACACS contact good, “Enable URPC usernames as backup” = enabled,

TACACS username Log in OK. Log in validated by the TACACS+ server.

 Case 3: TACACS+ disabled or TACACS+ contact lost, “Enable URPC usernames as backup” = disabled,

TACACS username Log in FAIL. TACACS+ not validate the user.

 Case 4: TACACS+ disabled or TACACS+ contact loss, “Enable URPC usernames as backup” = enabled,

TACACS username Log in FAIL. TACACS+ not validate the user.

Same username and password in TACATCS+ and URPC

 Case 1: TACACS+ enabled, TACACS contact good, “Enable URPC usernames as backup” = enabled,

user Log in OK. Log in is validated by the TACACS server.

 Case 2: TACACS+ enabled, TACACS contact good, “Enable URPC usernames as backup” = disabled,

user Log in OK. Log in is validated by the TACACS server.

 Case 3: TACACS+ disabled, or TACACS+ contact loss, “Enable URPC usernames as backup” = enabled,

user Log in OK. URPC validates the user.

 Case 4: TACACS+ disabled, or TACACS+ contact loss, “Enable URPC usernames as backup” = disabled,

user Log in FAIL. Neither TACACS+ nor the URPC can validate the user.

Parameters to determine if user should be able to log in:

 TACACS enabled/disabled

 Good/Bad TACACS connection

 “Enable URPC usernames as backup” enabled/disabled

 Username/password on TACACS and power strip are same/different

Different username and password in TACACS+ and power strip: Power Strip username Login

 Case 1: TACACS+ enabled, TACACS+ contact good, “Enable URPC usernames as backup” = enabled,

Power Strip username Log in OK. Power strip validates the user.

 Case 2: TACACS+ disabled or TACACS+ contact loss, “Enable URPC usernames as backup” = enabled,

Power Strip username Log in OK. Power strip validates the user.

 Case 3: TACACS+ enabled, TACACS+ contact good, “Enable URPC usernames as backup” = disabled,

Power Strip username Log in FAIL. Power strip not validate the user.

 Case 4: TACACS+ disabled or TACACS+ contact loss, “Enable URPC usernames as backup” = disabled,

Power Strip username Log in FAIL. Power strip not validate the user.

BayTech MMP User Manual

Questions and Answers: