24
NAVIGATION MODE >>>
> USE
> FR
> ES
Displaying the route
Once the address has been entered, the ad-
dress input menu allows the route to the
destination to be displayed on the map.
> Push the rotary control/push button to
the right.
> Select
Show route to display the route
on the map.
The route is calculated.
You can start the route guidance directly
from this screen by selecting
Start.
The other options on this screen are de-
scribed under “Displaying the entire
route” on page 40.
In addition to these described functions,
you can also display alternative routes.
> Select
Options und then select
Alternative routes.
After a short time, the alternative routes
will be displayed.
The area on the right-hand side shows the
colour key for the individual routes, the
mileage for each route and the estimated
driving time.
> Select the desired route.
The desired route is calculated and the
route guidance will begin.
Showing the destination on the map
> In the address input menu, push the ro-
tary control/push button to the right.
> Select
On map.
The map display is opened and the desti-
nation is displayed.
Storing a destination
> In the address input menu, push the ro-
tary control/push button to the right.
> Select
Save.
> Enter the desired name.
The destination is transferred to the last
destinations and protected.
To Next Page
Loading...
Need help?
General
