AR6201 - RT6201 - RCU6201 - AR6203
DV 14307.03 Issue 1 09/2013 Page 1-1
Section 1 GENERAL DESCRIPTION
1.1 Introduction
This manual describes the operation and installation of the
RCU/RT/AR6201 VHF Transceiver Family equipment. The ID label on your
device shows the part number for identification purposes.
Before starting to operate the unit(s) please read this manual carefully
with particular attention to the description referring to your
device(s). This manual also contains several optional elements of the
system (second controller for example), that may not be contained in
your delivery package and in that case are not applicable.
For simplification of this document the short version “620X” for VHF
transceivers and “RCU6201” for the remote controllers will be used
instead of the full part number identification.
The manuals DV 14307.03 I&O (“Installation and Operation”) and DV
14307.04
M&R (“Maintenance and Repair”) contain the following sections:
Section
DV 14307.03
I&O
DV 14307.04
M&R
1 General
X X
2 Installation
X X
3 Operation
X X
4 Theory of Operation
N/A X
5 Maintenance and Repair
N/A X
6 Illustrated Parts List
N/A X
7 Modification and Changes
N/A X
8 Circuit Diagrams
N/A X
1.2 Purpose of Equipment
The 620X transceivers enable voice communication between aircrafts or
between aircraft and ground using the very high frequency band between
118.000 to 136.9916 MHz respectively 136.9750 with a selectable channel
spacing of 25 kHz respectively 8.33 kHz. The wide scope of accessories
also allows usage of the 620X VHF transceivers in ground-based
applications.
To Next Page
Loading...
Need help?
General
