AR6201 - RT6201 - RCU6201 - AR6203
DV 14307.03 Issue 1 09/2013 Page III
Section 2 INSTALLATION 2-1
2.1 Limitations 2-1
2.2 Unpacking the Equipment and Preparation for
Installation 2-1
2.3 Mechanical Installation 2-1
2.3.1 AR6201 and RCU6201 Installation 2-1
2.3.2 AR6203 Installation 2-3
2.3.3 RT6201 Installation 2-5
2.4 Electrical Interface 2-8
2.4.1 Connectors and Pin Assignment for AR6201, AR6203
and RT6201 2-8
2.4.2 Inputs / Outputs Detailed Description 2-11
2.4.3 Connector and Pin Assignment for RCU6201 2-16
2.5 Installation and Configuration of 620X Transceivers 2-17
2.6 Antenna Installation 2-18
2.7 Installation Setup for RT/AR6201-(X1X) 2-19
2.7.1 Entering Installation Setup 2-19
2.7.2 Leaving Installation Setup 2-19
2.7.3 Page Up / Page Down in the Installation Setup 2-19
2.7.4 Storage of Setup Data 2-19
2.7.5 Terminate Installation Setup 2-19
2.7.6 VU Meter 2-20
2.7.7 Installation Setup Pages - Data Description 2-20
2.8 Factory Default Settings 2-35
2.9 Typical Installations with Recommended Settings and
Wiring Diagrams 2-37
2.9.1 Single Seat Glider 2-37
2.9.2 Twin Seat Motor Glider 2-40
2.9.3 General Aviation (GA) Aircraft using Standard
Microphones 2-42
2.9.4 Installation Setup for individual dual headset
configuration (two IC circuit) 2-44
To Next Page
Loading...
