Bedfont NoxBox - INSTALLATION

22
4 INSTALLATION
WARNING: Installation of the BEDFONT® NOxBOX
i
system
involves potentially hazardous procedures. Only trained and
qualied personnel who have read and who understand the
instructions in this manual shall install this equipment. Wear
appropriate PPE, and, if applicable, turn off the power before
performing any installation, maintenance, repair, or troubleshooting
procedures.
The customer is responsible for obtaining information on any
applicable federal/national, state/provincial, and local codes or
insurance requirements that affect piping and electrical installation
and for obtaining all necessary approvals.
4.1 Unpacking Instructions
Onrstreceivingthissystem,theNOxBOX
i
systemshouldbecarefullyremovedfromits
packagingandvisuallyinspected.Ensureallsystemcomponentsarepresentandfreefromvisible
defect,wearordamage.Connectdevicetomainspowerimmediately.
4.2 Assemble Delivery Unit to Trolley
WARNING: When attaching or detaching the head unit from the
trolley, the system brakes must be applied to stabilize the trolley
to prevent accident or injury.
The NOxBOX
i
deliveryunitfeaturesaquickreleasesystemtoenablequickandeasy
assembly to the system trolley.
WARNING: Potential nger trap. Avoid injury; keep ngers clear
of the locking mechanism whilst placing the monitor onto the
trolley plate.