Need help?Do you have a question about the Bego Nautilus T and is the answer not in the manual?
General| Brand | Bego |
|---|---|
| Model | Nautilus T |
| Category | Dental equipment |
| Language | English |
Explains the necessity of the manual for safe operation and its role as part of the device.
Explains signal words (DANGER, WARNING, CAUTION, NOTICE) and associated symbols.
Warns about touchscreen damage from sharp objects and safe touch methods.
Covers device installation, operating personnel, and general safety requirements.
Details safe device handling, power connection checks, and basic servicing precautions.
Covers risks of electric shock, electromagnetic radiation, and deflagration.
Addresses burn hazards from hot surfaces and risks associated with exhaust gases.
Explains the importance and method of determining the correct casting temperature for alloys.
Provides detailed technical specifications, including dimensions, voltage, and air requirements.
Explains power requirements, grounding, fused sources, and single circuit use.
Outlines the procedure for turning the device on, including safety warnings.
Guides the process of activating the device online and registering it with the manufacturer.
Covers safe crucible handling, warnings, and types of crucible inserts.
Lists warnings and cautions for casting non-BEGO alloys, including titanium and beryllium.
Lists BEGO alloys with program location, casting temp, mould temp, and crucible insert.
Guides on choosing alloys from the device's program list and using the alloy finder.
Explains the two main casting modes: automatic and manual, and their operation.
Details manual casting supported by pyrometer temperature display and alerts.
Guides on selecting an alloy and entering optional log data for automatic casting.
Details the preheating phase of the automatic casting process, including chamber evacuation.
Explains the melting phase of the automatic casting process, including temperature monitoring.
Guides on selecting alloy and entering optional log data for manual casting with pyrometer.
Details the preheating phase of manual casting with pyrometer.
Explains the melting phase and temperature adjustments during manual casting.
Guides initial setup and alloy selection for casting without pyrometer.
Guides on settings and entering optional log data for casting using the camera.
Details the preheating phase for camera casting, including video monitoring.
Explains inserting the mould and the melting process during camera casting.
Guides initial setup and deactivating the camera for casting.
Covers electrical shock and burn hazard warnings before performing service.
Lists general malfunctions, error messages, warnings, and notes for troubleshooting.
Lists specific error messages (E001-E308) and their corresponding causes and remedies.
Lists warning messages (W001-W004) and their corresponding causes and remedies.
To Next Page
