QTERM-G56 Terminal Product Description
Qlarity-Based Terminal Hardware 51
Data formats
7 or 8 data bits
1 or 2 stop bits
Even, odd, or no parity
(Development tools support only 8 data bits)
Connector
12-pin round (Hirose HR30-8R-12SC)
Integral cable with DB15f (optional)
Ethernet (optional) 10/100Base-T with support for TCP/IP
USB device
USB 2.0 full speed (12 megabits/second) for access to internal
NAND flash file system
MEMORY
Standard
4 MB flash and 32MB SDRAM
256 MB NAND flash accessible as FAT-formatted file system
SPEAKER
Software programmable pitch and duration
Audio (.wav) decoder (optional)
REAL-TIME CLOCK
Standard
Independent processor-based real-time clock with battery backup, 1 second
resolution
PHYSICAL
Housing ABS/polycarbonate case with molded rubber boot
Size 129 x 234 x 43 mm
Mass 510 g
Processor ARM926EJ-S 192 Mhz
ENVIRONMENTAL
Sealing
NEMA-12 (Standard)
NEMA-4 (optional)
Temperature
Operating: -20 to 60 °C
Storage: -40 to 85 °C
Humidity 0 to 95%, non-condensing
Vibration 5 to 2000 Hz, 4 g RMS
Shock 20 g, 6 ms, 6 axis
POWER
8 to 32 VDC (See section 4.3.7 for current consumption)
5 VDC USB Host Port
INTERFACE (continued)
To Next Page
Loading...
Need help?
General
