Beissbarth VAS 6430 - English

| VAS 6430 | 17 | en
1 690 386 012 2013-09-24| Beissbarth GmbH
Contents English
1. Symbols used 2
1.1 In the documentation 2
1.1.1 Warning notices -
Structure and meaning 2
1.1.2 Symbols in this documentation 2
1.2 On the product 2
2. User information 2
2.1 Important notes 2
2.2 Safety instructions 2
2.3 Risk of tripping 2
2.4 Disposal 2
3. Registration card for adjustment
unit VAS 6430 3
4. Product description 4
4.1 Intended use 4
4.2 Safety information 4
4.3 Special accessories 4
4.4 Unit description 4
5. Installation/erection 5
5.1 Adjustment device 6430/1 5
5.2 ACC laser unit 6430/2 7
5.3 ACC reflector 6430/3 7
5.4 Calibration board 6430/4 8
5.4.1 Fitting calibration board to stand 8
5.4.2 Fitting calibration board
to adjustment beam 8
5.4.3 Fitting calibration board handles 9
5.5 Stationary base frame 6430/7 10
5.5.1 Space requirements 10
5.5.2 Holes 11
5.5.3 Floor preparation 11
5.5.4 Fitting connectors 11
5.5.5 Dismantling adjustment
device 6430/1 12
5.5.6 Installation 12
5.5.7 Maintenance/cleaning 13
5.6 Starting program sequence 13
5.6.1 Program-driven sequence 13
5.6.2 Quick access 13