CUBE® CONTROLLER
1MANUL964 Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 6-5
Chapter 6 Operator Interface / Advanced Configuration
Setup / Advanced Configuration
Advanced Configuration / Application Configuration
PFFA: Positions from Front Always
Using this function will force an Output ON at the same position regardless of whether the
application starts at the front or rear of the vehicle.
To activate this feature, toggle PFFA to YES and then program the Output to come on at
positions if started behind the vehicle.
Examples:
To Next Page
Loading...
