Using the Remote Control18
English
Selecting a Picture Mode
Using the Freeze Function
Depending on the types (contents) of the TV program you
are watching, you can select the most appropriate picture
mode to make the image more vivid and lively.
To change the picture mode, press the PRESET button on
the remote control. This enables you to select from the 6
preset picture modes.
You can also set up the picture mode you desire. For more
information, refer to the "Picture Mode Settings" on page
30.
When watching a TV program, press the FREEZE button
on the remote control to freeze the image on the screen
(the signal will continue to be broadcast). Press the
FREEZE button again to restore normal motion.
DV3250-En.book Page 18 Monday, December 13, 2004 12:19 PM
To Next Page
Loading...
