Using the Remote Control20
English
Using the Picture-in-Picture (PIP)/Picture-by-Picture (PBP) Function
Selecting PIP AUDIO
If your display is connected to an additional Video or PC
source, pressing the PIP/PBP button allows you to display
both images on the screen at once in PIP (Picture In Picture)
or PBP (Picture By Picture) modes:
• Full Screen: Normal display.
• PIP G on V: Enter PIP mode and display graphics on video.
• PIP V on G: Enter PIP mode and display video on graphics.
• PBP G by V: Enter PBP mode and display graphics by video.
• PBP V by G: Enter PBP mode and display video by
graphics.
V (video)= TV, AV1, AV1-S, AV2, AV2-S, AV3, AV3-S input
image. G (Graphics)= Component 1, Component 2, PC or
DVI input image.
If your display is connected to two different video and
audio inputs, pressing the PIP AUDIO button on your
remote allows you to select the sound from either the main
or sub screen in PIP mode, or from the left or right screen
in PBP mode.
DV3250-En.book Page 20 Monday, December 13, 2004 12:19 PM
To Next Page
Loading...
Need help?
General
