BenQ DV3250 User Manual

On-Screen Display (OSD) Menu 37
English
Example
When the V (FV) content based rating in the TV-Y7 age-based rating is set to BLOCK, this will
automatically block the V (FV) contents in higher ratings: TV-G, TV-PG, TV-14 and TV-MA.
Choosing a lower age-based rating blocks the higher age-based ratings regardless of content
based rating settings.
Adjusting V-Chip Setting
First-Time Setup
1. Press the MENU button on the remote control or the MENU button on the display to bring
up the main menu.
2. Press the  or  buttons to select TV and then press ENTER to enter the submenu.
3. Press the  or  buttons to select V-CHIP Block Settings and then press ENTER to enter the
submenu.
4. Enter a 4-digit password (the factory-preset password is 0000).
5. Press the  or  buttons to select Enter V-CHIP Blocking Settings, and then press the
ENTER button.
Adjusting Movie Ratings
1. Press the  or  buttons to select Movie Ratings.
2. Use the  or  buttons to select a rating.
Adjusting TV Ratings
Adjusting Canadian English and Canadian French TV Ratings
1. Press the  or  buttons to select Canadian English TV Ratings or Canadian French TV Rat-
ings.
2. Use the  or  buttons to select a rating.
Adjusting USA TV Ratings
1. After the password is entered, press the  or  buttons to select USA TV Ratings and then
press the ENTER button.
2. Use the or buttons to select an age-based rating.
3. Press the  or  buttons to select a content based rating, and then press the  or  buttons
to select Block or Show.
Canceling the V-CHIP Block Screen While V-CHIP Block is Activated
1. "The program is blocked" will appear on the screen if you watch a program that matches the
rating data you configured.
2. Enter the 4-digit password by using the channel selection buttons.V-CHIP Block will be
temporarily canceled. If an incorrect password is entered, it cannot be unblocked.
Changing V-CHIP Blocking Password
1. Press the MENU button on the remote or the MENU button on the display to bring up the
main menu.
2. Press the  or  buttons to select TV and then press the ENTER button to enter the
submenu.
3. Press the  or  buttons to select V-CHIP Block Settings and then press the ENTER button
to enter the submenu.
4. Press the  or  buttons to select Change Password, and then press the ENTER button.
5. Enter the new password.
6. You will be prompted to enter the new password again. Now you have successfully changed
the V-CHIP Blocking password.
DV3250-En.book Page 37 Monday, December 13, 2004 12:19 PM

BenQ DV3250 Specifications

General

Brand	BenQ
Model	DV3250
Category	Monitor
Language	English