EasyManuals Logo

BenQ DV3250 User Manual

BenQ DV3250
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #40 background imageLoading...
Page #40 background image
On-Screen Display (OSD) Menu32
English
PIP/PBP Functions are available with 480p, 576p, 720p, 1080i HDTV formats.
Aspect
Ratio
Adjust image aspect
ratio.
Use the and buttons on
the remote control or the
VOL and VOL buttons
on the display to change
selection.
Full Screen - Enlarge the
standard 4:3 video signal (e.g.
TV signal) to 16:9 full screen
video signal. When the
original input video source is
16:9 in ratio (e.g. DVD signal),
no change will occur.
4:3 Format - Display the
standard 4:3 video signal (e.g.
TV signal) in the center of the
screen at the ratio of 4:3. The
screen does not change, but
black blocks appears in the left
and right sides of the screen.
When the input video source
is 16:9 in ratio, deformation
will occur on the screen.
Letterbox -Fill the entire 4:3
screen with a 4:3 video signal.
The redundant part on the
upper and bottom of the
image will be removed and the
image will extend vertically
and horizontally to fill the full
screen. When the input video
source is 16:9 in ratio (e.g.
DVD signal), no change will
occur.
Anamorphic - Fill the entire
screen with a 4:3 video signal.
Some deformations may be
identified on the edge of the
image. When the input video
source is 16:9 in ratio (e.g.
DVD signal), no change will
occur.
Real - Display the actual size
of the video source without
zooming.
Video
Input
Select video signal input
source for PIP/PBP
function.
Use the and buttons on
the remote control or the
VOL and VOL buttons
on the display to change
selection.
TV, AV1, AV1-S, AV2, AV2-S,
AV3, AV3-S
AV1-S, AV2-S or AV3-S will
appear only when the S-
Video input of AV-1, AV-2 or
AV-3 is connected.
Graphics
Input
Select graphics signal
input source for PIP/
PBP function.
Use the and buttons on
the remote control or the
VOL and VOL buttons
on the display to change
selection.
• PC
• Component 1
• Component 2
• DVI
Reset All
Settings
Restore all settings to
default values.
Press the ENTER button on
the remote control or the
INPUT button on the display
to reset.
DV3250-En.book Page 32 Monday, December 13, 2004 12:19 PM

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the BenQ DV3250 and is the answer not in the manual?

BenQ DV3250 Specifications

General IconGeneral
BrandBenQ
ModelDV3250
CategoryMonitor
LanguageEnglish

Related product manuals