Using the remote control
1. Point and aim the top front of the remote
control directly at the display when pressing
the buttons.
2. The remote control must be held at an angle
within 30 degrees of the display's remote
control sensor window to function correctly.
The distance between the remote control and
the sensors should not exceed 5 meters.
3. Do not cover the sensor window on the front
of the display (below the power indicator
lamp), or place objects in front of it which
will block the direct lineof- sight between the
remote control and the sensor window on the
display.
Do not let the remote control become
wet, or place it in humid environments (like
bathrooms.)
If the remote control sensor window on the
display is in direct sunlight or strong light,
the remote control may not operate properly.
In this situation, change the light source or
readjust the angle of your display, or operate
the remote control from a location closer to
the remote control sensor window on the
display.
To Next Page
Loading...
