BenQ VM2221 - Connecting CI(Common Interface) Card

English
36 OSD (On-Screen Display) menu
Connecting CI(Common Interface) card
To view the scrambled (pay) services in digital TV mode.
1. TO INSERT A CI CARD
Insert the CI card into the slot in the direction of the arrow until it ts.
2. TO REMOVE A CI CARD
When removing the CI card, do not attempt to pull it from its slot.
Please push the EJECT button as illustrated below.
3. This function enables you to watch the scrambled services (pay
services) in some channels.
If you remove the CI Module, you can watch the available digital/
analogue programme in some channels.